Shenzhen N-NET Technology Co. Ltd

Model Number: NT-EN1400-1 Brand Name: N-NET Key Specifications/Special Features: Product descriptions:NT-EN1400 is a device for Ethernet transmission over coax featuring Coax to UTP connectivity, equipped with one Ethernet port and four BNC ports, which can make a ring or aggregationSo it can be used in pair or one to multipleEquipment can transmit signal over all kinds of common cables such as telephone line, Ethernet cable, UTP or coax with excellent isolation, thunder prevention and anti-jamming functionIn the practical project, this device is proved to be of high performance in surge preventionIt transmits IP video or Ethernet up to 1.5km at a max rate 70Mbps over existing coax, thus cut the cost by avoid re-cabling when swapping analog cameras for IP/Megapixel modelsNT-EN1400-AT (AF) series is POE version of model NT-EN1400, it can supply power over Ethernet cable for PD devices like HD cameras, wireless AP, IP telephone equipmentOur EOC support IEEE802.3af (15.4W) and IEEE802.3at (25.5W) standardNT-EN1400-AT (AF) series also supports POC (power over coax) function
Model at local side (namely the master) can supply power over coax cable for the model at remote side (the slave) and IP cameras

Features:
* Modulation frequency: 2-28MHz
* Modulation method: OFDM
* Encryption: AES128-bit encryption
* Networking: One Master and 7 Slaves
* Protocols: IEEE802.3/u 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
* Supports auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB and more
* Supports up to 1522Bytes data packet
* Supports store and forward working mode; backpressure on Half-Duplex and flow control full-duplex
* Power supply range: 12-56V DC
* Operation temperature: -20 to 70℃
* Supports Ethernet ESD protection and EFT
* POE (15.4W) and POE+ (25.5W) supported (optional)